What is Network training and Certifications ?
An organization can work without network device (Switches, A business can work without a network device (Switches, Routers, Access Points, firewalls, etc..). Either it is a small company or a large scale company. Network device plays an important role when we connect the computers within the location or to connect multiple sites. There are many manufactures for a network device (Such as Cisco, Juniper, D-link, etc..). Most of these organise exam to certify that candidate is eligible to manage their devices.
What is Cisco Certification?
Cisco is most popular for network certification training. Cisco certifications are divided into four levels (Associate -> Professional -> Expert -> Speciality )
This certification is the ability to effectively demonstrate knowledge of how to configure and manage a network.
Why join Skills Tech Point
Experienced Faculty
Practical Labs
High-performance Labs
Regular Tests
Mock Interview
100% Job Assistance
Affordable Fee Structure
Continues improvement
Training and Certifications
The Cicso Certified Netowrk Associate (201-301) examination is intended for individuals who have the knowledge of Cisco network devices
- It validates an examinee’s ability to:
- Explain the working of routers and switches
- Understand and configure router and switch
- Understand the router and switch ports
- Describe and position the core AWS services, including compute, network, databases, and storage.
- Identify Azure services for common use cases.
- Network Basics
- Introduction to networking
- Network components and devices
- OSI model and TCP/IP
- IP addressing
- Subnetting
- CCNA
- Introduction to Command-Line Interface (CLI)
- How a Switch Operates
- Basic Switch Configuration
- Initial Switch Configuration
- TCP/IP Applications
- Configure Cisco Router's interface
- Configure Layer 2 Discovery Protocols
- Initial Router Configuration
- Default Gateway
- Packet Forwarding Concepts
- Troubleshoot Port Issues and Switch Media
- Troubleshoot Duplex Issues on interface
- Configure IPv6 Connectivity
- Configure and implement IPv4 Static Routes
- Configure and implement IPv6 Static Routes
- VLAN and Trunk
- Troubleshoot VLANs and Trunk
- Router on a Stick
- Multiple VLANs and Basic Routing Between the VLANs
- Single-Area OSPF
- MultiArea-Area OSPF
- DR/BDR OSPF
- EtherChannel
- Improve Redundant Switched Topologies with EtherChannel
- IPv4 ACLs
- Numbered and Named IPv4 ACLs
- Provider-Assigned IPv4 Address
- Configure Static NAT
- Configure Dynamic NAT and Port Address Translation (PAT)
- Implement PAT
- Log into the WLC
- Monitor the WLC
- DHCP Scope
- Configure a WLAN
- Define a Remote Access Dial-In User Service (RADIUS) Server
- Explore Management Options
- Explore the Cisco DNA™ Center
- Configure and Verify NTP
- Configure System Message Logging
- Create the Cisco IOS Image Backup
- Upgrade Cisco IOS Image
- Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Secure Device Administrative Access
- Configure and Verify Port Security
- Implement Device Hardening
- Automation
- SNMP, Syslog, Packet Captring
-
Exam Code: 20x 0-301
Course duration: 40 Hours
Weekdays = 2 Hours * 5 days in a week = 4 Weeks
Weekends = 3 Hours * 2 days in a week = 7 Weeks
What is CCNA ?
What is the difference between CCNA training and CCNA certification?
CCNA training is about preparing for the CCNA exam. It is like tuition in which you learn about networking fundamentals and Cisco devices. you gain knowledge of networking and cisco equipments but not official certification.
CCNA certification is the official certification issued by Cisco. You need to pass the exam to get this certification. This is conducted by Cisco's authorised exam partners like Pearson Vue. The mode of the exam can be online (proctored exam) or offline (at an authorised exam centre).
The transcript (mark sheet) can be viewed after the completion of the exam.
The certificate can be downloaded after getting an email from Cisco, it takes upto 48hours.
What is CCNA certification fee ?
| Name of Exam: 200-301 CCNA | |
| Exam Duration: 120 minutes | |
| Format of question:> Multiple-choice, simulation questions, drag-and-drop | |
| Exam Fee: USD 300 + Taxes |
Why CCNA is valuable?
| It is recognized globally for networking certification. |
It provided career opportunities as:
|
How long is CCNA certification valid?
How to maintain CCNA cerfication
You can do one of following before expiration of certification
- Pass any one CCNP exam. such ENCOR
- Pas any one CCIE exam
- Earn 30 countin Continuing Education (CE) credit by doing Cisco CE program